picture show

less talk this time, more show. I've been crank'in, I think you'll like some pic's of recent work Click on 'em for a big photo:

Nice little sport tourer, I dig these bike a lot, and I really dig this paint.

And another 953 bike done! This one will be at the Minneapolis Bike and travel Expo March 3-4. Come on down and stop by my booth to say hi.




This one is pretty sweet, the lugs are carved up quite a bit from stock, the hidden binder seatlug was a pile of work but came out super-clean, and the polishe headbadge put's it over the top. 953 seems to be causing quite a clamor, I've had 4 inquiries about frames this week alone. Get'em while they're hot!

Incidentally, this one is a 60cm effective seat-tube, 58cm top-tube. I used a little thicker guage tubes on it due to the larger size and the hidden binder adds weight since i have to braze in solid stainless slugs into the top of each seatstay. But the frame still weighs in under 4 lbs, which isn't bad for a big frame. It'll be built up with a Reynolds fork and a record kit, should be a nice ride

Gotta run, have a headshok fork conversion to finish up, and a few forks to build, then it's back to making 29'ers.

bbbb

been too long

Yeah it's been a while since I've updated the blog, but for good reason: I was on vacation in Mexico all last week, and I've been trying to catch up from being gone all this week.

The vacation details will probably be a full posting on it's own in the future, but for now let's suffice it to say it was good. Not what I expected for Mexico this time of year, but not bad. The sun never showed it's face and it rained nearly everyday at somepoint, but we saw some cool stuff and did a lot of chillin' out.

I've been having chronic issues with my email for the last 6 months it seems and they've really ramped up the last month. My web hosting provider (netfirms) seems to be the source of all these problems and they also seem to not have the slightest bit of concern about them. Basically it seems that the bulk of people who try to send email to me through a Comcast server can't get messages to me. That's a big problem for someone trying to run a business as Comcast is now the largest internet provider in the US. Netfirms sucks. Period.

Therefore as I type this, my web hosting service is being migrated over to Network Solutions. Hopefully if all goes well it will be a seamless transition from the web-site end of things. All of my user contact info will remain unchanged (web address, email address, etc...) so you shouldn't notice anything. However there will be a short interruption in my email service this weekend. So if you email me this weekend and it bounces, don't be shocked, try it again next week, or give me a call.

I really hope this will be the end of my email issues, I'm getting really tired of dealing with them. I've been purchasing my domain name from Network Solutions from the start, so I figured I'd try their web-hosting package. I've only heard good things about their service, keep your fingers crossed.

Now that I'm back from vacation I'm not wasting anytime. This week I've got the bulk of the next 953 frame done and started on another Headshok suspension fork conversion. Finished up the artwork and ordered the decals for the Route 29'ers, and gotten in most of my steel for the next batch of those frames.

This 953 frame will hopfully be featured in an upcoming issue of Vintage Bicycle Quarterly in their "Builder Speak" section. And as long as my booth comes through for the March 3-4 Minneapolis Bike Expo, it will be on display there along with several Route 29'ers. I'll post pictures of this one soon here too, it's a bit fancier than the last one with more lug carving and a very unique seatstay attachment.

Once I get the first few Route 29 bikes back from powdercoating (Dave I know you'll read this, but don't take it as me trying to rush you!) and the decals (which are pretty sweet!) are on I'll be setting up a web-page dedicated to those. You'll find all the pertinent info on there, sizing, pictures, components, pricing and how to buy them on-line (yes, they'll be available for purchase on-line through The Route).

Well that's about all I have time for now. Got bikes to build and a few forks to make with those new crowns!

bbbb

They're here!

Yup, first shipment of the redesigned crowns arrived yesterday. Here's a bunch of pictures:



Overall I'm much happier with these than I was with the previous prototype. The fit of the blades in the socket is much better. It's just about perfect with no sanding at all. The steerer hole has a small burr on the top-side which prevented a steerer from fitting right in, but a couple turns with my reamer in there and it's a perfect fit. I thickened up the walls of the sockets a bit as I felt they were a little on the skimpy side before, and I thickened up the cross section of the horizontal members that connect the steerer to the blades. That was good because they're still under design spec, but I accounted for that in my design, so they still meet the factor of safety.
I guess that's one of the hassles of dealing with outsourced manufacturing, I need to modify my designs to accomodate their looser tolerances (but loose tolerances are what make it affordable).
Even despite beefing up a few areas, the crown is slightly lighter than the protoype designs due to the decreased overall height and width. It weighs in about 190 g which I feel is very appropriate for a mtb crown of this style and width. It's certainly much lighter than the old Long shen mtb crowns I used to use, and about half the weight of my hand made wide fork crowns. They're going to look great on my lugged 29'ers.

Billy, you'll have your fork pretty soon!

bbbb

New year news

Well, it's 2007, might as well start it off with some new furniture pictures. Yup, more furniture building in the last week of 2006.

This one is for our own personal use though. We finally pulled the pin on upgrading our 15-year-old TV as a mutual Christmas gift to each other, so we needed something set it on and hold the other components.

I had built our previous entertainment center too, it was a much larger all wood unit built from solid Aspen with a huge subwoofer built into the base of it (if anyone local is interested in it, I'll give it away just to get it our of our garage, includes a free 27" JVC TV!!!). We really wanted something much smaller and more modern, so after about 10 design iterations, this is what I came up with.
Basically steel framed construction with mostly Birch shelves (the display cabinet side is all metal). Surprisingly it took me almost twice as long to make this as it does a bed frame. There's less metal in it, but more welding and more accurate measuring (which takes time). The A/V shelves are completely cantilevered from the main frame, and there's a nice cord-management set-up behind them you can't see (to keep things tidy). The door was a bit tricky as I didn't want any exposed hinges. I had to weld in some extra recessed tabs to mount a special flush-mount hinge inside.


The finish of the steel was tricky. It looks really simple, but took quite a bit to achieve. We wanted it to look like bare darkened steel. I initially just did my usual black-oxide finish (that I use on the bed frames), but it gave it a slight gold-hue which didn't look good with the orange wall behind it. So sand all that off and try to figure out how to darken the metal but not make it look "coated". I really wanted the sanding marks to show through, but I didn't want the finish to be as bright as bare steel (which is very shiny silver, not gray).

So three coats of translucent paint later and a couple of clearcoats and I had my desired effect.
If you look really close you can see some small droplets of paint in there, but more than 6" away and it looks like bare gray steel.

The top and shelves are Birch, just finished with clear poly. I wanted maple in there, but had a difficult time finding wide enough boards. I didn't really want to hassle with edge gluing up boards for this project, so I just switched to Birch. They look incredibly similar.

Just to keep things all matchy-matchy (as Beth always says I like things), I make some maple tops for the Def-tech speakers on either side of the entertainment center. I think it all ties in nicely with the room's colors and Maple trim.

Not exactly a bike, but a pretty neat project I think. I've got one more bed to crank out soon too!

In the bike world, I finished up another frame and fork this weekend and got another route 29'er half built. I think I'm really getting those down pretty well. This one has a double bent downtube, which really helps solve some of the angle issues with the lugs and BB shell. It's a slight bend, so not obvious when you first look at the frame and I think a bottle cage on the downtube will almost make it disappear. I had to build up a custom roll-bender to make it happen though. I'm fairly pleased with how it worked, but I'll probably have to switch to non-butted downtubes to really maximize the smoothness of the bends.

My first shipment of fork crowns is also on the way, might arrive today infact. I'm pretty psyched to see those, hopefully the manufacturer nails the tolerances slightly better than on the prototypes. They assure me they have... Pictures will be posted once I get them.

In addition to the entertainment center (mentioned above) that I need to get rid of, I'll soon have an extra set of drums which I don't have room for. As part of a fantastic barter, I'll be getting a new (to me) set of Grestch drums in exchange for a frame, which means my Yamaha's need a new home. If anyone is interested in set of very nice Yamaha Stage Custom Fusion drums (10, 12, 14, 22" with a 14 x 5 steel snare) in Cranberry birch finish, let me know. I'm going to need the space. They're about $1000 worth of drums, I'd let 'em go for $600. email me for more info or pictures.

bbbb

Is that thing Ti?

I'm pretty sure those will be the four most commonly heard words directed at the new owner of this beauty.

Finally, some pictures of a complete 953 lugged bike. Sorry it took so long. One editorial note, I'm leaving the steerer uncut for the customer on this one, hence the goofy looking steerer in this picture.

It's a pretty flashy bike, decked out with all that Campy Carbon stuff, Eurus wheels, Carbon bars and post, and most importantly: a matching stainless steel headbadge!

I don't usually put tubing decals on my frames as I mix and match tubes quite a bit and I never felt the tubing mattered much to the finished product. But in this case I think an exception needs to be made. The stainless tubing is what makes this thing possible and besides, who can resist such a sparkly decal!

All the logos other than the 953 decal and the headbadge were etched into the frame. I had suspicions about how this would look, but in the end I'm quite pleased with it. All the lettering came out very crisp and clean. I enlarged my downtube logo a bit from my usual size. This helped fill the big 35mm downtube, but the larger font size makes the letting look more crisp as well. It shoudl hold up quite a bit better than any decal would as well. It's very difficult to scratch, I tried on a few test samples and the only way I could ruin it was to go over it with some kind of abrasive.

The owner requested his name etched into the top-tube as well, I thought that came out really nice. Hopefully he doesn't mind me showing the world his name.

The complete bike came in around 17lbs as shown (including those 2 weighty Record bottle cages!). Not bad for a lugged steel bike.

In other news, both bikes I posted last time are still up for grabs, Probably not the best time of year to be trying to unload a couple really nice bikes, but they're both really, really great deals. You know you want one.... buy 'em before they hit ebay!

Finished up another frame this week as well, a nice sport tourer. I added a couple of fun details to this one too. Here you see the top of the brake bridge with one of my "B" 's added on top. Then I brazed the headbadge on this one and will be masking the paint around it. Thought I'd try something different, I think it'll look pretty sweet after paint.

In addition, I'm getting better with my engraver, this one has the owner's name engraved on the BB shell right below the serial #. I had hoped to engrave my double "B" logo on the brake bridge, but by the time I got both B's on there, it was pretty darn small, I thought the raised letter was more visible.

Well, I'm about out of time today, Have a great Christmas everone and remember...

Buy my bikes!

bbbb

Still looking for that perfect gift?

Just in time for Christmas, I've decided I have too many projects and bikes hanging around the shop. Not to mention that developing this 29'er project and a custom fork crown have most of my monetary resources tied up right now, so a little extra cash couldn't hurt. Therefore I offer you the exceptionally unique opportunity to purchase a used Bob Brown Cycles bike or frame.

I've got 2 of them to offer right now, one for the roadies, one for the off-roadies.

First is BBC serial # 0304. it's a 60cm seat-tube x 57.5cm top-tube road frame. 73 degree parallel angles, 75mm drop, 41.5cm chainstays. The top-tube has a 2 degree upslope to get the bars up slightly higher than a level top-tube. Polished stainless lugs, Matching polished stainless lugged stem, polished S & S couplers and polished fork crown and all lettering on the frame is actual Sterling Silver leaf!

The tubing is Dedachiai Zero Uno (.8/.5/.8 wall). Lugs are Long-shen long points, hand filed to shape and hand polished. Rear dropouts are Henry James stainless with polished faces.
The paint is a custom mix, it's white with a metallic silver pearl over it. It's quite stunning in the sunlight.

The bike is overall in good shape, but the paint is starting to show signs of several years of traveling with me around the country. There are a few paint nicks and chips, I've taken close-up pics of the main offenders. Shown below, there's a good chip on the underside of the downtube that's been roughly covered with white paint (note the nice silver lettering). The top side of both seat-stays has a small chip above the dropouts from a packing incident. I simply wrapped this spot with white tape and it's pretty unnoticable, for the picture I obviously removed the tape. And the driveside chainstay has a couple bigger nicks shown below, towards the underside of the stay.


There's also a very small nick shown above at the edge of the top-tube coupler. This one is pretty minor, but it's on top of the top-tube, so I wanted anyone interested to know about it.

In addition, this was the first frame I clearcoated over the polished stainless lugs, which really brings out the shine in the stainless, however it had a downside on the seatlug and rear stem lug. The clearcoat doesn't adhere to the polished surface very well and I've had some chipping of the clear around the seatpost binder and the stem binder bolts. It's not noticeable from more than a foot away, but if you get in close to look, it's there.

I'm really focusing on the little flaws here because I want anyone who might buy this to know exactly what they're getting, but honestly this bike is still in pretty good shape, but it's not in show-room condition. I've been planning on refinishing it for about a year now and I'm realizing I just won't have time to do that for quite a while. It's still a great riding bike though, so I figured why not offer it up to someone in it's current state. I also couldn't bring myself to strip it down and do a full repaint quite yet because it's not _that_ bad and I hate to lose to beautiful Sterling Silver logos in the process.

Let's talk about how neat this bike still is. Even in it's current state, I get compliments on it wherever it goes. The lugged stem is a great finishing touch, and with the full silver Campy Record kit that is on it, it will turn heads.

The picture below shows the downtube lug and it really captures the look of the paint in the sunlight. Lots of silver sparkle, but overall still looks white.




The bike currently has a full Campy Record kit (9 speed) on it from 1999. It's the last generation campy with all polished aluminum parts and no carbon, which is why it's on here. Everything on the bike is polished basically. The wheels are 28 hole Record hubs with Sun Venus deep v rims (polished of course!). Bar is TTT Prima, Avocet saddle, Campy record post. Complete this bike weighs in at about 19.5 lbs, which isn't bad for an all steel S & S bike. It rides great. Anyone local to me is welcome to come over and check it out or take it for a spin. All components are in excellent condition both mechanically and cosmetically as are the S & S couplers.

I'm flexible on how it's sold, it could be a frame and fork, could be a whole bike if you want, or I can sell you whatever portion of the parts you want. If I were to recreate this frame and fork today it would have a price tag of about $2500, the stem would be $300, and the build kit would be another $2000. I'm thinking I'd like to get $1000 for the frame, fork,and stem or $2200 for the whole bike (minus seatpost, and pedals). I can make you an excellent deal on any S & S accessories you want to go with it as well.

Bike #2:

BBC serial # 1013 Headshok singlespeed S & S mountain bike!

Sorry for the crummy pics, I didn't take the time to setup a proper backdrop.

This one has a 19.5" seat-tube, 23.5" top-tube, 50mm BB drop, 72 degree head angle (with sag), 73 degree seat angle. The frame is very light, it's Columbus Foco mtb tubing, 35mm downtube, 31.8mm top tube, 28.6 mm seattube. Track dropouts with stainless steel faces (to prevent paint damage), wishbone style seatstays. Two panel BBC/Kenwood racing limited edition paintjob. Entire frame is fillet brazed. The fork is a cannondale Fatty SL, 70mm travel, damping dial with 5 position damping adjustment (including lockout). The fork was recently rebuilt with new seals so it should be good to go for a while. Air sprung, oil damped, very nice smooth action.
I also have a 50mm travel fork that matches this bike, if you prefer shorter travel and less weight, this is the option for you. This fork has modified steel legs and reduced height similar to the one shown here(scroll to the bottom of the page).


Here are a couple of closer shots. The paint is in great shape on this one, overall condition of the bike is excellent. This was designed and built as a very lightweight cross country racer. Therefore it's not the stiffest frame on earth, but it's very light and climbs great. If you want a bike for huckin' big gaps, this isn't it. It's a full-on race machine. Infact I rode this bike to a 3rd place solo finish at the 24 hours of Afton (as a singlespeed), and 2nd place team finish at 2 hours of 9 mile.
The parts are also quite light. Currently it's built up as follows:
Wheels: Rear- Ringle singlespeed freewheel hub, 28 hole laced to Velocity Razor rims (dark blue anno) with 15g spokes. Front- Real hub, laced to Velocity Razor rim (dark blue anno) 15g spokes. Tires Michelin Comp-S lites.
Cranks: Specialized cold-forged, the super-nice old style 110bcd cranks, very low Q, polished finish (note these cranks aren't shown in the above picture), Shimano UN72 BB
Stem: Cannondale Headshock, Bar: IRD Carbon Riser.
Brakes and levers: Cane Creek Direct Curve
Seatpost: Ritchey WCS, Saddle Bontrager Ti (I might want to keep those)
Headset: custom machined to fit headshok! Sealed bearings, aluminum cups.

All together the complete bike weighs in about 18.5lbs with the 70mm fork and S & S couplers! It's a little lighter with the short travel fork.

You might notice in the top picture I have 2 chainrings on it. I often did that for traveling as I could have a big gear for riding on the roads and a low gear for off-road. Sometimes I wouldn't know how much off-road riding would be available where I was traveling, so it was good to have a big gear to cruise the roads.

This is an absolute one of a kind bike. It is a used bike, so I won't offer any kind of warranty on it, but the frame is quite sound and will provide years of service if not abused. This is really the bike for a lighter weight finess rider who want's to go light and fast.

Again, anyone local to me is welcome to take it for a spin. Brand new this frame and fork would cost about $2500, parts are probably another $800. I'd take $1000 for the whole shebang (minus seat and post), which is a stellar deal. Or make me an offer. or if you want any other parts let me know, I can probably get them for you. Frame and fork and headset alone :$600

This one has just been hanging aroung the shop, there's nothing wrong with it at all, but at this point a complete and utter 29'er addict and I can't see that I'll use this one much anymore. If you want any S & S accessories I can make you a great deal on those as well.

email me with any questions

bbbb

a few pics

Today I've finally got a few pictures of things.



First, let's start off with the 953 frame. Here's how it looks today, but it's going to change slightly. The customer decided to go for etching in the logo in the downtube instead of the black decals shown here. It will also be getting a stainless headbadge (see below).


My headbadges finally came in. Actually, they're just stainless letters, but I make 'em into headbadges. To the left is what the raw letting looks like. These can be brazed right onto the head-tube, or brazed to a stainless backing to make a more traditional looking badge.

To the right is what the final product looks like when brazed onto a backing and curved to match the headtube.

Cranked out another bedframe as well this past weekend. This one is a little different from the one I made for myself. The headboard is styles differently, and the frame comes apart into smaller sections (the house it's going into has a tough corner at the top of a set of stairs, so it needed to be reasonably compact). Once again, I like the look, industrial, but not overly so.

The frame is all 2" square tubing as usual, but the internal tubes of the headboard are 1" square. The two side beams are bolted to the headboard, and the foot beam is bolted to the two sides so the whole thing comes apart into 4 pieces. The finish is my usual black oxide coating hand rubbed into the steel, then clear lacquer over it to give it some shine and prevent any rusting. I like that finish because you can still see the shininess of the metal below, but it's nicely darkened. Looks much better than paint. Someday I should try it on a bike frame just for fun.

I've got one more like this to make, then hopefully an entertainment center. I think I'm going to be adding a page to my regular website with some of this kind of stuff on it for sale, so if anyone is interested, let me know. Doing some occasional projects like this is a fun diversion of frames once in a while.

I'm putting the final details into a nice little sport tourer frame this week too. Once I have that done, I'll probably have some time to crank out a couple more Route 29'er frames. busy, busy, busy!

bbbb

long time, no write.

I haven't had the time or the inclination (at least not at the same time) to write here lately. I was out of town for 5 days at Thanksgiving, then got sick at the end of that trip. Spent most of the next week in bed, then had to leave town again. Fun stuff.

But that's not to say that a lot hasn't happened. Sure being sick and out of town slows me down, but I've still managed to get a few things done.

First off I had the good fortune to finally get to meet up with Doug Fattic over Thanksgiving. He lives about 25 miles away from my in-law's in MI, so while we were over there, I made a trip over to his shop. For those who don't know, Doug is another framebuilder, located in Niles MI. His work all looked great, and he's known more for his painting skills. We spent quite a bit of time talking paint since there are so few that actually do paint. He's got a pretty killer set-up for a shop, he owns 7 acres of land right in town with a lovely old farmhouse on it. Then there's a 1100 sq. ft. concrete out-building a couple hundred feet away in which is his shop. So his commuite is a short walk out in the yard.
He's got a tremendous amount of equipement sqeezed into that building too. I always thought I was kind of an equipment whore, but he's got me beat by a good amount! Toys everywhere, and he knows how to use them. I guess that's part of teaching framebuilding classes, you need to have stuff for multiple people to use at the same time.

It was a great visit, I really enjoyed talking to Doug and hearing some of his stories from England in the 70's where he learned to build. He's a great guy and for anyone looking to take a framebuilding class, I would highly recommend his. He knows what he's doing and has a good teaching background.

Lets see, what else....

I finished up the first Route 29'er (that's the name of the production bikes) prototype and it's out for powdercoating right now. I'm pretty axious to see the results. It was a tough decision to go with powdercoat because in general I'm not a fan of powder over lugs. The powder finish is thicker and tends to obscure the detail on the lugs. However it's also very durable and considerable cheaper/faster than wet-paint which is pretty attactive for this application. I've got most of the graphics worked out for the decals, so I'll have those on order soon.

I promised the owner of the 953 frame I'd put some more pictures up here of the completed frame, so I'll have some next week. I'm etching in the logos on the frame instead of using decals. It looks really nice.

Headbadges! Yes, they came in early. Again, I'll have pictures soon, but they're nice, cut stainless with my overlapping "B" logo. Should be a nice touch on future frames.

Engraving. I am finally figuring out how to use my Pantograph machine and it's working pretty well. I engraved the serial Number and owner's name on the BB shell of my most recent build with good results. I'm still working on figuring out how the cleanly engrave wide block letters so I can recreate my logo on more items, but I'm getting close. I think once I get my micro end-mill adaptor made, that should solve my problems. Again, pictures soon. I made up a nice little jig to hold BB shells on the engraving table, now I need a small rotary table on there, so I can put my name on the raised dropout faces!

Crowns: I made more modifications to my crown design based off the prototype, thickened up a few areas, and increased the size of the fork blade ports slightly to fit more blades. I also shortened the overall height, which I feel makes it look better. I also changed the width, so the front and back of the crown are parallel with a small radius out at the steerer tube area.



Other stuff:

I'm hoping to crank out a couple more steel bed frames this weekend. People have been seeing the one I made for Beth and myself and liking it, so I'm making more. I'll probably add some pitcures to the website soon, under a class of "other stuff I build". There's a growing number of things that fall into that category, and I think I'd like people to know about them. I've got another entertainment center to build for our living room coming up and a few other small ideas I'd like to see come to fruition.

Are bike builders all audio nuts too? I've noticed this trend, I know Curt G is into nice audio stuff, while I was Doug Fattic's shop I noticed some ADS monitors in the shop, which are aweful nice for an industrial setting. It's one of my older passions. I started building speakers in college and still enjoy it (although I don't have much time for it now). My Jetta has a pretty swell combination of parts in it, but recently I had been really annoyed at mystery noises and speakers cutting out. So I finally took things apart one night last week and found a loose connection in one of the cross-overs for the front components and a loose voice-coil dust cover in one of the speakers. A few minutes with the soldering iron and some super-glue and things were instantly improved. I'm still amazed at the sound from the ADS 320 components I've got in there. They're 17 years old now and still have the clearest sounding vocal range of anything I've heard. Had to repair the flexible surrounds twice in that time, but otherwise they seem to hold up great, that's amazing for a set of speakers that have been in and out of 4 different vehicles now.

I've been having issues with our home stereo too. Actually not the stereo, but one amp in particular. I've got an older Audiosource amp in there running the masive 4th order bandpass sub I built into the bottom of the entertainment center. Well, somewhere inside that amp is a power relay that isn't funtioning right, so it only turns on occasionally. I hear it click in and out when it actually decides it wants to turn on, but I can't find the stupid thing. Once the amp is on, it works great, but it just doesn't come on very often. I need to tear into it a but further, but in the meantime I found another solution. I picked up a set of Def-tech 2002's off ebay which were in terrible cosmetic condition, but all the drivers and amps are perfect. Thankfully that made them sell for a song. So I'll be refurbing those and putting them in the living room. That solves 2 problems, the first if the mystery amp power thing, since these have built-in poweder subs, I won't need my external sub amp. Secondly, we both want a new entertainment center, but I've been hesistant to build it because the sub for our existing sound system is incorporated into the base of our existing entertainment center. I was going to have to cut up the existing one and remove the sub, than make a new, nice looking enclosure for it and place that in the room. With the sub built into the new speakers, that problem is solved too.
Anyone local want a fairly nice hand-made solid Aspen entertainment center with a really good sub suilt into it? you'll want a new amp : )

I promise pictures next week. Really.

bbbb

Showin' and tellin'

Today's edition will be complete with full color photos, something which is becoming a rare treat around this blog.

As I said earlier, my first prototype crown showed up. Here it is in all it's glory:

As I mentioned in previous posts, this one isn't perfect and I'm going to have to do some work with the supplier. The lower span that connects the steerer to the fork blade is below spec. thickness, and the steerer tube bore is under spec as well. In addition, now that I see it in person I have a few ideas on making it slightly more visually appealing without complicating it. I think I'm going to have the from and back face machined down parallel to each other, and put a radius out to the center section (where the steerer goes).


I heart Richard Sachs Lugs:

Quite literally in this case. The customer wanted Richard's lugs, but with the cut-outs changed to look more like hearts. Richard has a geometric shape cast in that's kind of a stylized heart. The customer wanted a more literal interpretation, so I added some brass to fill in parts of the window and re-filed things to what you see here.
I like how the shape of the cut-out follows the shape of the lug edge so nicely.

Richards lugs are really nicely done, simple and tasteful, but with enough room to be a bit creative. I like 'em. These should make for a nice sport-tourer with a little extra flare.

29'er talk:
Yup, here's the first prototype of these too. Can you tell I've been busy?
This one isn't exactly how the finished product will look as they'll have sliding rear dropouts, but it's a close appoximation. It's not quite done here, I still need to add the brake bosses, bottle bosses and cable stops, but you get the idea.
It's fully lugged, clean and tidy, just how I like my bikes. The sliding dropouts will be about the cleanest you've seen, I've been working hard to make them match the style of the bike.

I'm glad I went through the process of building this one up front, I came across a couple of snafu's that slowed me down and I was able to work on ways to solve them now, rather than on a finished frame. This one will just be for show to give the shop an idea of what to expect. They're double oversize tubes, 31.8 top and seat-tube, 35mm downtube. S-bend seatstays and chainstays for great tire clearance, disc and rim brake compatible, suspension corrected for an 80mm travel fork (they'll probably have the Reba or White Bros fork stock).

These are the dropouts I had originally spec'd as I thought the socket style would go nicely with the lugged frame and they'd save me time by not having to file scallops in the dropouts. Well, I used 'em here since I don't have the sliders in yet and I'm glad I'm not using them for the rest. First off, they have 14mm chainstay ports, which is perfect for the 4 year old Columbus mtb chainstays I have, but Columbus changed their stays to a 12.5mm tip now and my stock of old ones is almost gone. So that would be a big hassle. Secondly these really didn't save me much time over regular flat plate dropouts. By the time I smooth the braze around the seat-stay adjustable socket, I could have finished a set of regular dropouts. But on the plus side, they do look pretty good overall, and I like the cast-in disc tabs.

So I'm one step closer to these things being reality, but there are still a few kinks to work out.

and finally, here's a link to a nice video of the state CX race:

http://www.youtube.com/watch?v=Xaio8y-wU1s

About 3/4 of the way through is a nice pan of me rounding the corner into the creekbed dismount. Look for the gold skinsuit. Lots of good footage out there!

bbbb

recap -o- the week

I haven't had much time to write here this week, so I'll condense things down.

Last weekend was the state cx race, it was fantastic as usual. Lots of volunteer here, and tons of work put in by the Vitch. Thanks Vitch!
I headed out Friday afternoon to help put poles in the ground for all the snow fencing we were going to install on the course. I had no idea what we were in for. The "stakes" were steel sign posts (like the stuff that holds up stop-signs) and the city gave us one slide hammer to install them with. It was a pile of work, well mostly for the Vitch and Ezra as Ez kept telling me not to do the pounding because he thought my shoulder was still too injured. But eventually as they got tired, I took over and put my share into the ground. We got it all up before dark and it looked great. I had to high-tail it back to St. Paul though as I had a show to get ready for.

Packed up all my drums and other gear in the car, loaded up the other guys cars, and we headed out to the Guthrie. We got there a little early, so we parked out by the loading dock and waited. Didn't take more than 2 minutes and a security guard was out there to ask what we were doing. We explained and he let us go, but told us to be sure to move our cars as soon as we were unloaded. They're on top of things at the Guthrie, especially on opening night of a play.
We got unloaded and moved all our gear up to the Bar. It sure looked like a lot of stuff in a tiny space sitting in the bar, but once it was unpacked and set-up we seemed to fit in the space quite well.

We started playing early because it turned out the new show was shorter than expected and they wanted us playing when the show let out. So about 9:30 we started off gently. We kept the sound a bit low for the first hour as we didn't know how things would sound in the long, narrow space we were playing in. But as things went on, we got louder and more into our usual deal, and the people were still diggin' it. We ended up playing for almost 2 1/2 hours (with one good break) which is a hugely long time for us. All seemed to go great though, people thought the sound was good and we certainly had a blast. The bar did a good business, so everyone was happy. In the end, the Guthrie folks seemed thrilled by our turnout and performance and said they'd like to have us back again. We can't wait.

So after packing up all our stuff and getting home, I managed to get to bed about 2am. Slept till about 8:30 and that was all I had in me. I'm just not very good at sleeping in, I don't like trying to sleep when there's daylight. So I got up, feeling mighty tired, had my morning bowl of Lucky-Charms and figured I better head over to the 'cross race to help out. I got my stuff all set, headed out to the garage and promptly remembered I had a car full of drums out there that I had to empty before I could leave. Sigh.

Unloaded that, loaded up a bike and a bunch of warm clothes and headed out. Things were pretty under control at the race, so I helped out with a little last minute course marking and watched the C race start. I had made up my mind before I left that I wasn't going to race on account of how tired I felt. But that was before the Kenyan showed up. He shows up at the race and promptly spends the next half hour talking me into racing, so I go register and change my clothes just in time to get to the start line.
I figured I'd just hang out in back, ride the race, finish and feel like I accomplished something. That was my plan anyways, but I'm not very good at sticking to a plan like that. The gun went off (metaphorically speaking) and I was near the back, riding down the first straightaway. Already I was frustrated with people and feeling the need to move up, so I did. I started passing people, mostly on the runs, and I just never seemed to stop. By the third lap I actually felt pretty good, but the whole time I had the thought in the back of my head that all I had eaten all day was a bowl of lucky charms, and that wouldn't sustain much.

Side note: I had blown up the bearings in my usual Cane Creek CX rear wheel, so I needed a replacement singlespeed wheel and had brought my Stan's wheels with, complete with the Crow's mounted. I had been thinking I wanted to see how they worked for CX, and here was my chance! Believe it or not, that wheelset with those fat tires weighs virtually the same as my racing CX wheels with 27c tires.

Those tires turned out to be just the ticket for ths course. There were plenty of bumpy grass sections and washboard dirt roads, and these things just flew. This was the first cx race I had ever done on a singlespeed where I passed people on the gravel road section on every lap. It all just worked and I just kept hitting it with everything I had left.

I started really feeling the effects of my complete lack of preparations with 1.5 laps to go. The legs started feeling rubbery, but I figured this was the end of the season, so why not just push through it. The barriers and runup actually kept feeling better and better for me throughout the race, it was the flat grassy sections with the headwind that really took it out of me.
In the end I finished, 18th. Yup, that guy listed as #186 in the results is me, guess Billy didn't feel like putting in my name! I was in the back 20 or so people, so that means I passed about 40 something people in the race, no wonder I never felt like I was riding alone.

It was really good for a race I wasn't going to do.

This week I've been stocking up on shop-time. I'm working on several frames right now, and nearly have the first prototype 29'er frame done! That one has gone really quite well, despite a few set-backs. I wanted to see what glitches I might run into that will slow me down building these, and after this first one I think I'd identified most of them and I'm well on my way to having them solved. More details on that later.

I got my first sample of the new fork-crown. Came in Wednesday. It looks really cool and the fit and finish seem good, but there were 2 areas that were off substantially in dimension. There hole for the steerer tube was .015" undersize in one axis and one of the cross sections was too thin. Despite that, the look is good, and it definitely looks viable, I just need to get these Q/C issues resolved. I also have another possibility of getting them made locally, which would be awesome.

I've had a few folks bugging me to post some pictures of the completed 953 frame and I will. I've been waiting for my new headbadges to come in before I took final pictures of it, but I'll try to get some of the whole frame so you can see what it looks like complete.

That's about all for now.

bbbb

more rambling

So apparently the Guthrie has a daily internet scanner that crawls the web looking for any new text with the word Guthrie in it. I know this because I met with the nice fellow from the Guthrie again yesterday to actually get the correct tour of the space and he was pretty embarrassed because appearantly many of his co-workers were filled in on my last blog entry. I think I've used the word Guthrie enough in this first paragraph that this entry should also show up on their daily scanner, so I just wanted to say, sorry James, but your tour was fantastic and someone over there should give you a raise for having to put up with people like me! Thanks for the opportunity to play.

One more note probably worth saying, for those thinking about coming to the show Friday, we'll be up in the Target Lounge. When you walk in take the very long escalator to your right up, then take a left at the top and we'll be in the lounge area just up on your right.

The weather was crazy nice here the last couple days. I think it hit 70 yesterday. I was able to sneak out for a short ride yesterday in the warmth, it felt great riding in shorts and short sleeves. I was hoping to ride a little dirt as I love fall mountain biking, but they had Battle Creek closed again this week for a controlled deer hunt, and I didn't feel like going farther that that, so I took out the road bike. I've been really diggin' my road bike again, now that I finally figured out what was creaking on it. All summer it had this creak, once per pedal stroke, seemed like the BB, but amazingly it would usually go away when I got out of the saddle. I must have greased everything in the drivetrain, seatpost, saddle and pedals to no avail. Things like that really bug me, I mean enough that I didn't even want to ride the bike. It's not necessarily the sound that bugs me either, it's the principle. It's like a sign that my bike isn't perfect, and I can't figure out how to fix it. That bugs me to no end because I like to think (yes, I have some ego issues) that I can fix anything, especially on a bike.
Well, I finally found the creak, it was the stem clamp on the steerer. All the bolts were dry just the slight shifting my weight when pedaling was enough to make it creak. Greased everything up and it's been beautifully silent since. I love a really quiet road bike, it just seems right.

I probably don't have to tell anyone reading this, but this weekend:

This is it, the last MN race of the year, the State Championships. Git yerself down to Basset Creek Saturday to race, volunteer or just spectate. It'll be bigger than ever and you'll be kicking yourself until next Buck Hill season if you don't show up.

bbbb

Short stories

Two kind of funy stories today. First off, it's November 7th, get' yer arse out and vote. Please.

First story has to do with voting. I went to my polling place to do my civic duty. As usual there were quite a few seniors there and there was a small line. I signed the form and got my ballot, then proceeded to get in line for a booth. The kind woman directing the line said a few times that the new electronic polling machine was available, but nobody would use it. The polling had been open for almost 5 hours and she said only one person had used it.

So I said," I'll give it a shot, is it self-explanatory?" All the seniors in line looked at me like I was a crazy fool, trusting a machine to fill in the little circles for me! As soon as I sat down at the machine I could tell, all eyes were on me. It was very simple, feed your ballot in and then it walks you through each item on the ballot one screen at a time. You simply touch the person you want to vote for on the screen, it highlights that person and you touch another button on the screen to move onto the next question. At the end it gives you a summary page to check your selections, then it prints right on the regular ballot card, filling in the circles you noramally would with a pencil. Then it kicks out the ballot, you can look at it and check it over, then put it in the ballot box to be couted just like everyone else.

The volunteers were thirlled that someone had actually used the computer. It really wasn't anything special, it wasn't any easier or harder than filling the thing out by hand (unless you really hate filling in circles with a pencil). But each screen was really clear and obvious as to what you were voting on. I could definetly see how it scares off people who don't use computers, but come on folks, this is 2006 I'm not one of 2 people in my polling district who have ever used a computer. Try it out, you might like it!

Story Two:

As you know my band, Derailleur has a show this Friday night at the new Guthrie theater. The guy who set-up the show had asked me to meet him today at 11:30 to go through where to load in, where we'd set up, etc... That's an unusual amount of forethought for the type of places we usually play, but this is the Guthrie, so I figured it was ok and I agreed to meet him.

So I get there at 11:30 and the guy is running a little late. Once he shows up, I introduce myself as Bob and he says "Oh I thought you were scheduled for noon." I told him I had 11:30 on my calendar, but whatever, I'm flexible. So he seems kind of flustered and says, how about a tour of the place first, then we'll meet one other person to discuss things. I'm thinking ok, how much can we really need to"discuss", but a tour sounds cool, so sure. So he proceeds to give me a full tour of the whole new building, behind all the stages, each theater, all the costume and prop building areas, the works. I'm thinking, man this is great, then he says we're going to lunch!

The whole thing is odd. I mean he never mentioned where we'd be playing during the tour, we went through several bars. I even ran into my Cousin Ann (hi Ann! Thanks for letting me know about this opportunity) along the tour and we talked about the fact that Derailleur would be playing Friday night and she'll bring some folks over after the show. Next he says, it's time for lunch, which kind of shocks me. So we sit down to lunch at the restaurant on site and he starts askingabout my connections to the Film Board, and such. I'm like, ahh I don't have any connection to the film board.... Then it all came together and I said "I don't think we're having the same meeting!" His eyes opened up really big and he figures out who I am and has a moment of panic because he's appearantly supposed to be meeting a memeber of the Film Board who is also named Bob at noon! He forgot about me coming in at11:30 and assumed I was the Noon Bob. So he's really embarrassed, I'm really embarrassed, I tell him he better get to his meeting, and I'll take off. I just ask him to email me specifics of what we need to do Friday.

I left to go back to work to find out I had a parking ticket because his tour took over 30 minutes and I figured I'd be in and out in about 15. damn.

He called me back later and felt really bad about the error, which was really an honest mistake. Heck I got a really cool tour out of the deal, so I wasn't too worried about it. We got our arrangements sorted out and all's good.

What an odd day.

please vote today. really.

bbbb

many small topics

It's Friday and what better way to end the week than to recap a bunch of smaller things that occurred this week.

1. Let's start with some shameless self-promotion, rock-n-roll style. The "worlds greatest rock band" Derailleur has a big gig coming up. We're going to be playing at the new Guthrie Theater's lounge next week Friday (Nov 10th) after the opening night of their latest play EDGUARDO MINE. We'll be the only act, so it'll be a Friday night of acoustic and electric tunes, 2 full sets in a clean nice lounge setting. In otherwords, pretty much unlike any derailleur show prior. I don't think there's a cover and we'll go on around 10:15 and probably play all night if you can take it.

2. Hot tub is in and on! Finally got the electrical straightened out, there was an airlock in the circulation pump preventing water from getting pumped to the heater and the heater had a second hidden reset button on it that isn't mentioned in the manual. Thanks to the Hot Springs Dealer for showing me how to reset that.

3. 953 frame is getting the final surface finish, it looks good! Most of the parts are in, once I clear-coat the fork it will just about be ready to go out.

4. Headbadges! yes, people have been asking me for these for a while. I'm finally having a batch made up. They'll be cool, trust me, and hopefully will provide me a template for making an engraving stencil so that I can do more logo engraving on misc parts with my new engraver.

5. BB Fork Crown?!? Yes, rumors are true, I've been working on a super-custom, super bbbb type fork crown for a while. I've gone through about 5 design iterations now and supposedly the first prototype for inspection will be shipping to me next week! It'll be wide, mtb style, Bridgestone inspired, but with improvements to make it stronger and fit more modern frames/tires.
Here are a couple of images of the 3D design. It has lots of room for customizing and a nice flat surface on top for engraving my logo on both sides. My hope is to use these on the 2nd semi-production 29'er frame (the rigid singlespeed) and to offer a rigid fork option for the geared, suspension corrected frames. This will give me a way to make a fork that fits with the theme of the fully lugged frames.

Hopefully, if the prototypes pass testing, I will have these early next year. One note to other framebuilds whom I know read this, please don't bother asking about buying these yet. I'm not in a position to sell them to other builders yet, but I'll let folks know if/when that might happen.
I'm really excited about this project and hope it pans out. It's take a lot of work to design this in a manner in which it's affordable to manufacture in smaller quantities.

6. Semi-production frames are getting closer. First round will be a geared, suspension corrected 29'er, fully lugged, classically styled, and with some really clean and tidy looking sliding horizontal dropouts. That will make it a pretty darn good all-around frame, run it geared, run it single, suspended, or get a cool suspension corrected rigid fork from me. Run discs geared or single (with disc mounts on the sliding dropout), or v-brakes or canti's. Look for 'em at The Route this winter/spring. Or hopefully at the Minnepolis Bike and Travel Expo.

7. State 'cross race is coming up, get ready!

bbbb